Engine Cage

Well, I had mentioned earlier that I had to cut off the engine cage and cut the tail light wires to get the engine out. So here is what I did to fix that situation. First I had to re-do the cage mounting system so that it was removable, then I had to put in a wiring harness that had a plug to the car wires. This took a bit of time b/c I ran the cage wires inside the tubes and then out at each light, a nightmare to feed the wires, but well worth the result. Then I had to repaint everything so it was all pretty. The previous owner welded on the light brackets but didn't paint the metal (a bit rusty). Here is what it all looked like when I was done.